Razor eSpark Owner's Manual download pdf (Page 7)

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers

at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Paciﬁc Time.

REPAIR AND MAINTENANCE

Turn power switch “OFF” before conducting any maintenance procedures.

1 To adjust the brake cable

play, thread the brake lever

adjuster in or out 1/4 to 1/2 turn

until the desired brake adjust-

ment is attained. Most

adjustments are complete at

this step. If brake still needs

further adjustment, proceed to

step 2.

2 If brake is too tight or has

too much slack, use a 10mm

open wrench to loosen the

brake cable and adjust accord-

ingly.

3 Inspect the brake pads (A)

for proper alignment against

the wheel or excess wear. To

realign brake pads, loosen the

xing nut (B) and adjust the pad

to contact the rim. Retighten

and test. Readjust as needed.

q Adjusting the Brakes

Using a 10mm open wrench,

loosen the brake cable bolt.

q Front Wheel Replacement

Using two 17mm open

wrenches, loosen the locknuts

by turning the wrenches coun-

ter clockwise. Remove wheel

and install replacement wheel.

8-4

8-1

8-2

8-1

8-2

8-5

8-6

8-5

8-4

Right Side (Throttle)

8-5 - (Short) spacer

8-4 - Flat washer

Fork

8-3 - Flat washer

8-2 - Lock washer

8-1 - 17mm locknut

Left Side (Brake)

8-5 - (Short) spacer

8-4 - Flat washer

Fork

8-3 - Flat washer

8-2 - Lock washer

8-1 - 17mm locknut

Middle

8-6 - Front axle bolt

Note: Front wheel hardware

sequence

8-3

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Razor eSpark Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Scooters Razor eSpark