Razor Crazy Cart Owner's Manual download pdf (Page 10)

2 Using a Phillips screwdriver,

loosen the four (4) screws on the

chain guard and remove chain guard.

5 Re-attach the chain guard with

the hardware removed in step 2.

3 Using two (2) 16 mm wrenches,

remove the locknuts on the front

axle bolt and slide axle bolt out

from the front wheel.

6 Re-attach the motor cover with

the hardware removed in step 1.

WARNING: Failure to

properly install and tighten the

screws, nuts and bolts that afﬁ x the

steering wheel and seat can cause

you to lose control and crash.

Note: Front wheel hardware

sequence

Front Wheel/Chain Replacement

Tools Required: Phillips screwdriver, 4 mm Allen wrench, and two (2) 16 mm wrenches

1 Using a Phillips screwdriver and

a 4 mm Allen wrench, loosen the

seven (7) screws and the two (2)

hex bolts on the motor cover and

remove the cover.

4 Push down on the chain

tensioner to create slack in the

chain and then carefully remove

the chain from around the wheel

sprocket and remove wheel from

the front fork. If replacing the chain,

also remove the chain from around

the motor shaft. Install replacement

wheel/chain.

Right Side (Throttle)

7-1 Locknut

7-2 Split Washer

7-3 Flat Washer

Fork

7-4 Spacer

Left Side

7-1 Locknut

7-2 Split Washer

7-3 Flat Washer

Fork

7-4 Spacer

7-1

7-2

7-3

7-2

7-4

7-1

REPAIR AND MAINTENANCE

Turn power switch “OFF” before beginning repair or maintenance:

• Read the instructions

• Remove charger plug

• Turn the power switch off

• Secure the unit under repair

• Exercise caution around

exposed parts

• Contact Razor customer service

if unsure about any repair or

maintenance

hex

bolts

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Razor Crazy Cart Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Scooters Razor Crazy Cart